Lunatone DALI-2 relay module 16 A, high inrush, standby feature, DIN rail (DALI-2 RM16 I HS 86456203-I-HS)

DIN-rail DALI-2 relay module with one normally-open contact rated for high inrush currents – for switching loads without a DALI input or for cutting the mains supply of DALI drivers. Its standby feature switches the drivers off when the lights are off and back on with a group or broadcast ON command, which it then repeats so the freshly powered drivers respond (enabled in DALI Cockpit). The module is supplied from the DALI line (typ. 3.8 mA), switches at the voltage zero crossing to protect the contact, and its power-up and system-failure behaviour is set in DALI Cockpit.

• Contact: 1 × NO, 277 V AC
• Max. load: 3000 VA, continuous current 16 A, breaker max. 16 A
• Max. inrush current: 320 A
• Standby feature: yes – switches driver supply, repeats ON commands (off by default)
• DALI: DALI-2, device type DT7, 1 address, supplied from DALI (typ. 3.8 mA)
• Switching: zero-cross, max. 1 Hz
• Mounting: DIN rail, 1 module (98 × 17.5 × 56 mm)
• Protection: IP20
• Manufacturer reference: 86456203-I-HS